Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Hampton?
Spring replacement in Hampton typically costs $180 – $340 for one spring. Most doors use a matched pair that’s replaced together, so a full pair usually runs about $360 – $680. Those are typical estimated ranges for the Hampton market, and the written estimate we provide after looking at your door sets the final price.
We’re Hampton Garage Door Repair Pros, and springs are the part of a garage door we get called about more than any other. A torsion spring that snaps leaves a door you can’t lift, and a door you can’t lift is often a car you can’t move. Here’s what the work actually costs in Hampton, what moves the number up or down, and how to avoid paying more than you need to.
Key Takeaways
- One spring: typically $180 – $340. A matched pair: about twice that, so roughly $360 – $680.
- Torsion and extension springs are priced differently. Most Hampton homes have torsion springs mounted above the door.
- The spring is cheap. The labor, correct winding, and safe removal of a broken spring are what you’re paying for.
- Estimates are free, and we work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors and openers.
- A snapped spring is a safety issue, not a DIY job. Call (833) 842-4783. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work prices out line by line in Hampton. These are typical estimated ranges, not a quote for your specific door.
| Service | Typical Estimated Range |
|---|---|
| Torsion spring replacement (one spring) | $180 – $340 |
| Torsion spring replacement (matched pair) | $360 – $680 |
| Extension spring replacement (one spring) | $180 – $340 |
| Extension spring replacement (matched pair) | $360 – $680 |
| Spring plus cable repair | $310 – $590 |
| Spring plus roller replacement | $290 – $560 |
| Spring plus opener repair | $300 – $660 |
| Full spring and track realignment | $300 – $580 |
| Spring plus panel replacement | $430 – $840 |
For context on the rest of the door, our spring replacement work sits alongside cable repair at $130 – $250, opener repair at $120 – $320, and full door repair at $150 – $600. If your springs are gone and the door panels are tired too, a new door installation runs $700 – $2200, and sometimes that’s the better money. We’ll tell you when it is.
What drives the number up or down on a spring job comes down to a few things. Single-spring versus pair is the biggest swing. Torsion springs (the ones wound on a shaft above the door) and extension springs (the ones that stretch along the tracks) carry different labor. Doors on a high-lift track, doors with an unusual weight, and doors where a previous repair left the wrong spring on the shaft all take longer. If the techs only swap the spring without checking the cable, you’ll be back in the same spot in a few months, which is why we price the check into the visit.
What Affects Spring Replacement Pricing in Hampton
Hampton’s housing stock shapes how spring jobs go here. A lot of the homes are older, and older doors often have been repaired more than once by someone who guessed at the spring size. That’s the single biggest cost variable in this city.
- Single spring vs. matched pair. Most residential doors have two springs, one on each side of the torsion shaft. When one breaks, the other has usually lived the same life and is on its way out. Replacing the pair costs about double a single spring, but it’s usually the smarter spend than paying two separate visits.
- The wrong spring on the door. A spring has to match the door’s weight. A prior repair with the wrong size throws the door out of balance, wears the opener, and can snap again early. A tech who checks the door weight first will sometimes find the spring needs a different specification than what’s on it.
- Door weight and materials. A single-car steel door carries less spring load than a double-car wood door. Heavier doors need heavier springs, which list at a higher price. Door width, insulation, and glass panels all count.
- Torsion vs. extension. Most Hampton homes with a modern door have torsion springs above the header. Extension springs ride along the side tracks and are simpler to reach, but they still need the same care. The work differs, so the price differs.
- Condition of the cables, drums, and bearings. Springs don’t fail in isolation. A frayed cable, a worn drum, or a dry bearing left in place will shorten the new spring’s life. If we find one of those, we’ll show you and price it as a line item rather than folding it quietly into the total.
- How quickly you need it. The price for spring work is set per job by the written estimate, whether you call today or later in the week. Same-day scheduling is available, and there’s no premium attached to a fast visit. Call (833) 842-4783. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
How to Save on Spring Replacement
There’s no clever trick to a cheap spring job. The savings come from doing it right the first time and not paying for the same repair twice.
- Replace both springs at once. If one spring has broken and the other is the same age, replacing the pair in a single visit costs less than two single-spring visits a few months apart. It also keeps your door level, which protects the opener.
- Ask for a door-weight check. A tech who weighs the door before specifying the spring gets the right part on the first visit. That one step prevents the early re-snap that turns a $340 repair into a $700 story.
- Get the estimate in writing before work starts. The estimate is free, the price is set per job, and the written quote is what you pay. If any number changes, it changes with your approval first.
- Have the techs check the opener while they’re there. A door that’s been running against a broken spring has put stress on the opener motor and gears. Catching an opener problem during a spring visit at $120 – $320 is cheaper than a separate call.
- Don’t run the opener on a broken spring. If the door won’t lift, stop pressing the button. Running the motor against a snapped spring can damage the opener and the door panels, and that turns a spring repair into a larger job.
- Ask what’s included in the quote. A fair spring quote names the spring, the labor, the safety check on the cables and drums, and the balance test after winding. Ask the tech to walk through the door at the end.
If you’d like to know what your door needs before deciding, call us for a free estimate at (833) 842-4783. We’ll tell you what’s actually wrong, what it costs, and what you can safely skip.
Can You Replace a Garage Door Spring Yourself?
We don’t recommend it, and we’d rather say why plainly. A torsion spring stores an enormous amount of stored energy, and releasing it wrong can cause serious injury. The winding bars, the number of turns, and the order of operations all matter, and a mistake here doesn’t just leave you with a broken door.
What you can safely do is recognize when a spring is failing and stop using the door. Look for a gap in the coiled spring above the door, a door that slams rather than lowers gently, a banging sound when the opener runs, or a door that’s heavier than it used to be when you lift it by hand. Any of those means the springs need a trained look.
Leave the winding and unwinding to technicians who do it every day. Our technicians have up to 12 years of experience with torsion and extension spring work, and they’ll check the door balance and the surrounding hardware before they call the job done. If you’re not sure whether it’s the spring or the opener, we can help you figure that out too. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, so we’re familiar with the door and opener you already own.
What Happens When You Call
You call (833) 842-4783, we answer 24/7, and we ask what the door is doing. If it’s a snapped spring, a door that won’t close, or a door that’s stuck partway up, we’ll book a technician. Fast dispatch from 7am to 7pm, Sunday through Friday.
The technician looks at the door, checks the springs, cables, drums, and rollers, and gives you a written estimate. Nothing is done without your approval. If the door needs a spring and the rollers are shot, you’ll see both numbers and can decide what to do now and what to do later. From opener to panel to spring, we cover the whole door in one visit where we can.
If your spring job turns out to be part of a bigger repair, our guide to garage door repair covers what else typically goes wrong and how those jobs are priced. If the door itself is past saving, our garage door installation guide walks through replacement options and what a new door runs in Hampton.
Where Spring Replacement Fits in the Rest of Your Garage Door
Springs take the weight, but the door relies on a whole system. Track alignment, rollers, hinges, and the opener all share the load. Our garage door repair service covers the full arc from a single spring to a door that’s beyond repair, and our opener repair and opener installation pages cover the electronic side. If the door is failing in multiple spots, our garage door installation options start at $700 for a basic single door and go up to $2200 for a larger insulated door.
Homeowners in Hampton who call about a spring often end up asking about the opener too, since a door that’s been fighting a broken spring has usually put wear on the motor. We handle both under one call. We’re garage door specialists, not generalists, and we’d rather solve the whole problem than send you to a second company for the other half of the door.
FAQs – Spring Replacement Cost
How much does it cost to replace one garage door spring in Hampton?
Typically $180 – $340 for one spring. A door with a matched pair is usually replaced together at about twice that, so $360 – $680 for the pair. The written estimate after we look at your door sets the final price. Call (833) 842-4783 for an exact quote – estimates are free.
Is it cheaper to repair a spring or replace the whole door?
Spring replacement is almost always cheaper than a new door. At $180 – $340 per spring, or $360 – $680 for a pair, it’s well under a new door installation at $700 – $2200. A new door only makes sense when the panels, tracks, and hardware are all worn out, not when one spring has broken. Call (833) 842-4783 and a technician can tell you which way your door falls.
Can you fix a broken garage door spring the same day in Hampton?
Same-day service is available. Call (833) 842-4783, answer a few questions about the door, and we’ll book a technician. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. A call outside those hours is booked into the next opening.
How much does spring replacement cost if the cable is broken too?
Spring plus cable repair typically runs $310 – $590. Cables and springs wear out together, so a single visit that replaces both costs less than two separate calls. Call (833) 842-4783 for a free estimate on both.
How long do garage door springs last in Hampton?
Most torsion springs are rated for a set number of cycles, and a typical residential door runs four cycles a day. Replacing both springs at once, balancing the door, and keeping the opener and rollers in good shape are the things that extend spring life. The written estimate tells you exactly what’s being replaced and why. Call (833) 842-4783 – a technician can check your springs and tell you how much life is left.
Written by the team at Hampton Garage Door Repair Pros.
Pricing reflects the Hampton market as of 2026. Hampton Garage Door Repair Pros offers free estimates – call (833) 842-4783.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Mark Fletcher"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Tracy Vaughn"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Paige Meyer